Service 10

Data Center Solutions

We design, build and look after data centers and server rooms, from a single room with a few racks to a multi-row data hall. Racks and containment, precision cooling, UPS and power distribution, fire suppression, monitoring and cabling, planned together and delivered by one team.

Plan your data center What goes inside Design to support

01 / 02Power, cooling, safety & cabling

Inside a data center

Everything a data center needs to keep servers running, chosen to work together rather than bought piece by piece.

Design & build

Racks & aisle containment

Racks laid out in hot and cold aisles, with containment that keeps cold air where the servers draw it in, on a raised floor or with in-row cooling.

Best for Server rooms and data halls of any size

Power & cooling

Precision cooling

Precision air conditioning built for IT rooms: it controls temperature and humidity closely, runs around the clock, and has a standby unit ready to take over.

Best for Rooms that run 24×7 at a steady load

Power & cooling

UPS & power distribution

Modular online UPS systems, battery cabinets sized to your runtime, and metered PDUs feeding each rack from two separate supplies.

Best for Every rack that must stay up through a power cut

Safety & monitoring

Fire detection & suppression

Early smoke detection and clean-agent gas suppression that puts out a fire without water, so the equipment survives along with the room.

Best for Rooms where water would cause as much damage as fire

Safety & monitoring

Monitoring & security

Sensors and alerts for temperature, humidity, water leaks and power, on one dashboard, with access control and CCTV on the doors.

Best for Spotting trouble before it becomes downtime

Cabling & ops support

Cabling & operations

High-density copper and fibre cabling in overhead trays, labelled and documented, plus migrations and ongoing maintenance of the whole room.

Best for New builds, expansions and migrations

Cold aisle containment

A roof and doors over the aisle stop hot and cold air mixing, so cooling costs less.

Steady temperature & humidity

Controlled closely around the clock, unlike comfort air conditioning.

Online UPS

Double conversion, so servers get clean power with no switch-over gap.

Early smoke detection

Detectors pick up smoke before there are flames.

One dashboard

Temperature, humidity, power and alerts in one place.

Overhead cable trays

Cables kept off the floor and out of the airflow.

Raised floor

Perforated tiles deliver cold air right in front of the racks.

Cold air under the floor

Pushed under the raised floor and up through tiles at the racks.

Modular & scalable

Add power modules as the load grows, with a spare for N+1.

Sized for the room

Gas cylinders sized for the room volume and layout.

Water leak detection

A sensing cable along the floor raises the alarm at the first drop.

High-density patch panels

More connections in less rack space, neatly patched.

Server racks

Standard racks with cable management, blanking panels and room to grow.

Warm air back in

Takes the hot air from behind the racks and cools it again.

Battery cabinets

Sized for the runtime you need, or to bridge to a generator.

Clean-agent gas

Puts the fire out without water, so electronics are not ruined.

Rack sensors

Temperature and humidity measured where the servers are.

Fibre backbone

High-speed fibre between racks and to the rest of the building.

Sliding end doors

Seal the aisle while keeping access easy for your team.

Standby unit (N+1)

A spare unit takes over if one fails or needs servicing.

A + B power feeds

Two metered PDUs per rack, each on its own supply.

Control panel

Raises the alarm and releases the gas after a warning delay.

Access control & CCTV

Only the right people get in, and every visit is recorded.

Labelled & maintained

Every cable labelled and documented, with AMC support after handover.

Hot & cold aisles
Containment
Raised floor

Precision AC
Humidity control
N+1

Modular UPS
Metered PDUs
A + B feeds

Smoke detection
Gas suppression
Alarm panel

Environment sensors
Leak detection
Access control

Fibre & copper
Migrations
Maintenance

01 / 06

Scroll inside the panel to explore each device, or outside it to carry on down the page.

How much redundancy do you need?

Redundancy decides what a single failure costs you. We match it to how long your business can afford to be down, so you do not pay for more than you need.

N
Just enough
Exactly the cooling and power the load needs. Simple, but one failed unit means downtime.
Best for Small server rooms where a short outage is acceptable
N+1
Most common
One spare
One extra unit on standby, so any single unit can fail or be serviced without stopping anything.
Best for Most business server rooms and data centers
2N
Fully duplicated
Two complete, separate systems. A whole system can fail and the other carries the full load.
Best for Banking, healthcare and anything that must never stop

In use SpareApplies to cooling units, UPS modules and power feeds alike.

02 / 02One team, start to finish

Design, build & support

We plan the whole room together, build it, test it under load, and look after it once your servers are in.

01
Assess
We look at your servers, power, cooling, space and how much downtime you can accept.
You getLoad & site survey
02
Design
Rack layout, airflow, power and cooling capacity, redundancy, safety and cabling, planned together.
You getLayout, specs & quote
03
Build
Racks, containment, cooling, UPS, fire suppression, monitoring and cabling installed by one team.
You getA finished room
04
Commission
Everything tested under load, including a power-cut and failover test, before your servers move in.
You getTested & documented
05
Support
Preventive maintenance, monitoring and fast response under an AMC, plus help when you expand.
You getA room that stays up

Goes with it

Planning a server room or data center?

Tell us about your servers and how much downtime you can accept, and we’ll plan the power, cooling and layout with a clear quote.

Plan your data center